Here’s How To Clean ANOVA Nano To Make It Work Like Brand New Again

While cooking in my ANOVA Nano, I noticed it isn’t heating up no matter what I do. However, my one is not that old, it went through much wear and tear. When I called my mom for suggestions, she just utter a few words – “give it a good clean.”

However, how to clean ANOVA Nano?

The cleaning process is pretty easy. You can do it in 2 ways – a vinegar bath and a dishwashing detergent bath. Place the cooker in the pot with water above the MIn line. Mix an equal part of vinegar or a little dishwashing detergent. Run it in 158ºF/70ºC fo 30 min. Your ANOVA Nano is clean.

Don’t worry; it’s not only your ANOVA Nano. No matter how careful you are, your ANOVA Nano will eventually need cleaning.

So, keeping your device clean and well-maintained is essential if you want it to work like new. Let’s check how.

How To Clean ANOVA Nano

How To Clean ANOVA Nano

ANOVA Nano is a great circulator, best for those who want to try sous vide cooking without breaking the bank. It is also a great option for short space, as being smaller than other sous vide.

However, rarely does one consider cleaning it, which is quite crucial.

You may ask why cleaning ANOVA Nano is essential? Unlike other devices, you can open this device and access internal parts. When it helps you a lot in maintenance, it increases the chance of collecting fat, food, or residue inside it.

The result – you have an unclean device crying for cleaning.

But, how do I clean my ANOVA Nano? – A common question you may ask. Let’s check how you can clean your cooker.

1. Remove Food Residue Properly

Cleaning the residue is essential as it can cause the cooker to become less effective and lead to bacteria growth.

  • Use a soft sponge or cloth and some soapy water to remove food residue. However, don’t use harsh chemicals as they can damage the cooker. If you must use a chemical cleaner, make sure that you follow the instructions on the cleaner carefully.
  • Once you have removed all of the food residues and cleaned the cooker, rinse it off with clean water.
  • Be sure to remove all the soap residues before leaving it off to dry. 

2. Vinegar Bath

If you’re looking for a more thorough clean, you can try using a vinegar bath. A vinegar bath is one of the most popular ways to clean sous vide cookers. It is a simple and affordable way to keep it in top condition.

Moreover, vinegar is a powerful disinfectant and is also easy to use and safe for most surfaces. If your ANOVA Nano is starting to get a bit smelly, you can use vinegar to remove it.

Here are the things you will need to clean your ANOVA Nano with vinegar.

Necessary ThingsAmount
White vinegar1 cup
Water1 Gallon
Large container that can fit ANOVA Nano1

Follow these steps thoroughly to clean your ANOVA Nano using a vinegar bath.

  • Fill the container with one gallon of water and add one cup of white vinegar.
  • Submerge your ANOVA Nano in the liquid and let it soak for at least an hour.
  • After an hour, take your ANOVA Nano out of the container and rinse it off with clean water.
  • Let your ANOVA Nano air dry before using it again.

3. Detergent Dip

Another way to clean your ANOVA Nano is through detergent dips.

These are the things you’ll need to clean your ANOVA Nano with detergent

Necessary ThingsAmount
Bowl or Bucket1
Clean Sponge1
Mild Detergent1 cap full
Warm WaterAs much need

Here are the steps to give your ANOVA Nano a detergent dip

  • Start off by spreading a towel on a flat surface to protect your working area from spills.
  • Fill a bowl or bucket with warm water and add a cap full of mild detergent. Stir until it becomes a mixture.
  • Dip your clean sponge into the soapy water and let it soak in the soap properly. 
  • Gently wipe down the exterior of the ANOVA Nano with the sponge. Be sure to pay special attention to areas that look dirty or greasy.
  • Once you’ve wiped down the entire machine, rinse it off with clean water.
  • Use a clean sponge or cloth to remove any remaining soap residue.
  • Pat, the ANOVA Nano, dry with a clean towel.
  • Finally, allow it to air dry at room temperature completely before using it again.

How To Clean ANOVA Nano’s Dirty Display

How To Clean ANOVA Nano’s Dirty Display

If you own an ANOVA Nano, chances are you’re familiar with the situation where your device’s display gets completely dirty. This occurs due to it getting covered in ingredients, splattered food, and grease, making it difficult to read. The good news is that there are a few ways to clean your ANOVA Nano’s display.

Just follow these steps so you don’t damage your ANOVA Nano’s display.

  • Begin by unplugging your ANOVA Nano from the power source.
  • Next, dampen a piece of cloth and wipe down the machine’s display. You can try using a mild soap or cleaning solution if you have any stubborn stains. Just be sure to avoid harsh chemicals, which can damage the display.
  • Once you’ve removed all the dirt and grime, dry the display with a clean cloth.

Another option is to use a specialized LCD cleaning kit. These kits come with a solution and microfiber cloths specifically designed for cleaning LCD screens. The solution is usually alcohol-based and helps remove fingerprints, smudges, and other dirt and grime from the screen.

To use the LCD cleaning kit, simply follow these instructions.

  • Begin by unplugging your ANOVA Nano from the power source.
  • Next, dampen the cloth in the LCD cleaning kit and wipe down the machine’s display.
  • Then proceed on to spraying the cleaning fluid that comes with the kit if you have any stubborn stains.
  • rub and wipe in a circular motion to avoid damaging the display.
  • Once you’ve removed all the dirt and grime, dry the display with a clean cloth.

When To Clean The ANOVA Nano

When To Clean The ANOVA Nano

Around the house, you must regularly clean many different appliances and devices. The kitchen is full of them – from the oven and refrigerator to the stovetop and microwave. But the one little appliance that often gets overlooked when cleaning is the ANOVA Nano. 

Cleaning the ANOVA Nano is an important part of its upkeep. If not cleaned regularly, the device may not work as efficiently as it should.

So how often should the ANOVA Nano be cleaned?

The answer depends on how often you use it. Generally speaking, the more frequently you use the machine, the more you need to clean it. If you cook several times a week, you should aim to clean the ANOVA Nano once a week. But if you only use it once in a while, once every two weeks should suffice.

Of course, there are other factors to consider as well that include-

  • After each use
  • Once a week (if used multiple times a week)
  • If the machine has not been used in a while
  • If the display is dirty or splattered with food.

Some Tips To Remember When Cleaning The ANOVA Nano

The ANOVA Nano is a small immersion circulator that can be challenging to keep clean. So, here are some tips and tricks for keeping your ANOVA Nano clean and running like new.

  • Avoid getting water inside the machine. Immersion circulators are designed to operate in water, but they should never be submerged. Water can damage the machine’s internal components and cause it to malfunction.
  • If you need to clean the machine’s exterior, simply wipe it down with a damp cloth. Avoid harsh cleaning chemicals or abrasive scrubbers, as these can damage the machine.
  • The interior of the ANOVA Nano is where most of the cleaning will need to be done. The easiest way to clean the interior is to remove the stainless steel cooking pot and wash it with warm, soapy water. Be sure to rinse the pot thoroughly to remove all traces of soap before returning it to the machine.
  • In addition, to clean the heating element, use a damp cloth or paper towel to remove any food residue. If the heating element is particularly dirty, you can soak it in a solution of vinegar and water for a few minutes before wiping it clean.
  • Finally, to clean the drainage hole, simply insert a paperclip or other small object into the hole and push it through to clear any debris blocking it.


  • Can you take apart the ANOVA Nano?

Yes, the ANOVA Nano is designed to be taken apart for easy cleaning. All you need to do is remove the two screws on the back of the device and lift off the top panel. You can access all of the internal components and clean them as needed.

  • How often should you clean ANOVA sous vide?

We recommend cleaning your ANOVA sous vide after every use. However, if you notice any food or grease buildup on the device, you should clean it as soon as possible to prevent further buildup.

  • Do I need to clean my ANOVA?

Yes, you should clean your ANOVA after each use. Cleaning it is easy and only takes a few minutes. Follow the abovementioned methods to give your ANOVA Nano the best cleaning possible. 

Take Away

The ANOVA Nano is small yet powerful sous vide machine that provides quality service and will last you years. However, like every machine, the ANOVA Nano requires proper maintenance and cleaning to maximize performance.
So, to answer the most asked question, “how to clean ANOVA Nano,” one last time, just rinse it off with soap water after every use. It is the best possible way to clean the machine. To add to it, if you need a more thorough cleaning, follow the abovementioned steps.

The following two tabs change content below.

WhiteHouse Crawford

Latest posts by WhiteHouse Crawford (see all)

Leave a Comment